How to replace a defective snap fastener on a pair of rain pants.
During prolonged or heavy use, a snap can come off and get lost. Not to worry – a worn-out or defective snap on your rain pants a can easily be replaced. Replacement snaps often come with the product in a small bag. If you don’t have a replacement snap, you can pick one up in a fabric supplies store – they come in several shapes and sizes and fit almost anywhere. You will find more information about which buttons we have used and recommend under the point “Spare parts”.
Tools Needed
Hammer, snap fasteners for both sides (2 parts each), snap tool.
Tip: In this example we used a set of Prym snaps which are widely available in German stores.
Difficulty
Easy
Time Needed
Max. 10 minutes
Step One
You’ll need a hammer, a snap tool and replacement snap fasteners (2 pieces for each side).
Step Two
Position the top of the snap on the front side of your fabric from above and the stud piece on the bottom, press them together with the snap tool and tap them firmly several times with a hammer.
Step Three
Position the socket side on the front of your bottom fabric and place the back side of the socket piece on the back, press them together with the snap tool and tap them firmly several times with a hammer.
Finished! You did it.